Page 4
AFT Fuselage Zip Tie Mounts & Harness
Installation.
For this process we use self-adhesive Zip
Tie mounts and small Zip Ties to secure the
wire harness in place. Use the photos for
reference on where to install the Zip Tie
mounts and harness. Note: Start wire
harness installation from the AFT forward
leaving at least 2” of wire out of t
he
fuselage at the connection points for the
stab and rudder.
Once wires are secure use CA or Hysol on
edges of Zip Tie mounts for permanent
adhesion.
Make sure to have no sagging wires. You
can use aluminum tape around
Midbody Fuselage Zip Tie Mount
Installation.
For this process we used the self-adhesive
Zip Tie mounts. Use photos for reference
on where to install the Zip Tie mounts. Use
CA or Hysol on edges of Zip Tie mounts for
permanent adhesion.
