6
EN
ES
ES
PT
EL
AR
FA
To refit the operating valve
• Place the operating valve in place making sure to
align it
with the mark (
H)
.
• Press the valve then turn it until the desired position
is reached.
Using for the first time
• Fill the pressure cooker to the two-thirds mark (the
maximum mark) with water.
• Place the basket support
(K)
in the bottom of the
pressure cooker and place the basket
(J)
on top of it.
• Close the pressure cooker.
• Move the operating valve
(A)
to position
.
• Place the pressure cooker on a heat source set to
maximum power.
• Once steam starts to escape from the valve, turn the
heat down and set a timer for 20 minutes.
• Once the 20 minutes are up, turn off the heat.
• Turn the operating valve
(A)
to position
.
• Once the pressure indicator
(D)
drops down: your
pressure cooker is no longer under pressure.
• Open the pressure cooker.
• Rinse the pressure cooker with water and dry it.
• Note: The presence of stains on the inside of the
pressure cooker base has no affect on the quality of
the metal. This is simply a scale deposit. To remove
these deposits, you can use a scouring pad and some
diluted vinegar.
Before cooking
• Before each use of the pressure cooker, always re-
move the valve
(A)
(Refer to the “Using the opera-
ting valve” heading) and visually check that the
operating valve seat
(B)
is not blocked. If necessary,
clean it with a toothpick
- Fig 8
• Check that the safety valve
(C)
can move: Refer to
the “Care and Cleaning” heading.
• Refit the operating valve
(A)
and select the position
or .
TF_PRESSURE_COOKER_HEALTY_EXPRESS_INSF2_USA 16/11/10 15:41 Page6
