34
Trouble shooting
Many problems have a simple cause and a
correspondingly simple solution. The following section
describes a few difficulties you may encounter, and the
measures you need to take to cure them. If you find it
impossible to solve a problem with the help of these
notes please disconnect the unit from the mains and
ask your authorised
specialist dealer for advice.
Problem:
Machine does not switch on (LED
stays dark).
Cause:
Mains lead not connected correctly.
Remedy:
Check connection, push plug in firmly.
Problem:
Fluctuating sound.
Cause 1:
Bearing not oiled sufficiently.
Remedy:
Oil the bearing: see section entitled
‘
Fitting the platter’.
Cause 2:
Drive belt worn or exhausted.
Remedy:
Replace drive belt.
Cause 3:
Drive belt oily.
Remedy:
Clean drive belt, pulleys and / or platter
with methylated spirit on a cloth.
Caution:
Keep methylated spirit away from the
acrylic parts, as they could crack.
See also the section entitled
‘Care of the
machine’
.
Problem:
Unwanted hum
Cause:
The
G10
or a device connected to it is
not earthed.
Remedy:
Connect a separate chassis earth wire
(
G10
: earth terminal ‘GND’ to earth
clamp on the machine to which it is
connected).
Summary of Contents for G10
