T+A G10, User Manual

Page: 30 / 36

30
Approved usage
This device is designed exclusively for reproducing
sound and/or pictures in the domestic environment. It
must be operated in a dry indoor room which satisfies all
the recommendations stated in these instructions.
Where the equipment is to be used for other purposes,
especially in the medical field or for any application
where safety is an issue, it is essential to establish the
unit’s suitability with the manufacturer, and to obtain prior
written approval for such usage.

equipment which includes a radio or television
receiving section must be operated within the regulations
laid down by the Post Office and the Telecommunica-
tions authorities in the country in which it is operated.
Such equipment may only be used to receive or repro-
duce those transmissions which are intended for public
consumption. The reception or reproduction of other
transmissions (e. g. police radio or mobile radio broad-
casts) is prohibited.
FCC Information
to the user
(for use in the United States of America only)
Class B digital device – instructions:
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and
receiver.
-
Connect the equipment into an outlet on a circuit
different form that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV
technician for help.
Device approval and conformity with EC directives
In its original condition the unit meets all currently valid
European regulations. It is approved for use as stipulated
within the EC.
By attaching the CE symbol to the unit

declares its
conformity with the EC directives
89/336/EEC
, amended
by
91/263/EEC
, amended by
93/68/EEC
, and also
73/23/EEC
, amended by
93/68/EEC
and the national
laws based on those directives.
The original, unaltered factory serial number must be
present on the outside of the unit and must be clearly
legible! The serial number is a constituent part of our
conformity declaration and therefore of the approval for
operation of the device.
The serial numbers on the unit and in the original

documentation supplied with it (in particular the
inspection and guarantee certificates), must not be
removed or modified, and must correspond.
Infringing any of these conditions invalidates

conformity and approval, and the unit may not be opera-
ted within the EC. Improper use of the equipment makes
the user liable to penalty under current EC and national
laws.
Any modifications or repairs to the unit, or any other
intervention by a workshop or other third party not autho-
rised by

, invalidates the approval and operational
permit for the equipment.
Only genuine

accessories may be connected to the
unit, or such auxiliary devices which are themselves
approved and fulfil all currently valid legal requirements.
When used in conjunction with auxiliary devices or as
part of a system this unit may only be used for the pur-
poses stated in the section
' Approved usage '
.