T+A G10, User Manual

Page: 29 / 36

29
Safety notes
All components used in this device satisfy the current
German and European safety norms and standards.
Careful quality testing of all materials, painstaking
assembly by highly qualified staff and a fully automatic
computer-controlled final quality control proced.
For your own safety please be sure to read right through
these operating instructions. It is especially important to
observe the information regarding setting up and opera-
ting the equipment, and the safety notes.
The turntable should be set up in such a way that none
of the electrical connections can be touched, especially
by children. Be sure to heed the information included in
the section
' Setting up and wiring '
.
The power supply required for this machine is printed on
the mains supply socket. The unit must never be con-
nected to a power supply which does not meet this spe-
cification. If the turntable is not to be used for a long
period, disconnect it from the mains supply at the wall
socket.
Mains cables must be deployed in such a way that there
is no risk of people tripping over them, or of damage
caused by furniture. Particular care is required with con-
nectors, distribution panels and the turntable’s sockets
and other connections.
Liquid or foreign bodies must never be allowed to get
inside the case through the vent slots. Mains voltage is
present inside the unit, and there is a risk of lethal elect-
ric shock. Do not exert undue force on the mains con-
nectors.
Protect the turntable from drips and splashes of water.
Never place flower vases or other liquid-filled containers
on the unit.
As with all electrical equipment, this device should never
be used without proper supervision. Ensure that it is out
of the reach of small children.
The unit should only ever be opened by a qualified spe-
cialist technician. Repairs and fuse replacements should
be entrusted to an authorised

specialist workshop.
With the exception of the connections and procedures
described in these instructions, no work of any kind may
be carried out on the turntable by unqualified persons.
If the unit is damaged, or if you suspect that it is not
functioning correctly, immediately disconnect the mains
plug at the wall socket, and ask an authorised

specialist workshop to check it.
The unit may be damaged by excess voltage in the po-
wer supply, the cable network or in aerial systems, as
may occur during thunderstorms (lightning strikes) or due
to static discharges.
Special power supply units and excess voltage protec-
tors such as the
 'Power Bar'
mains distribution
panel offer some degree of protection from damage to
equipment due to the hazards described above.
However, if you require absolute security from damage
due to excess voltage, the only solution is to disconnect
the unit from the mains power supply and any aerial
systems.
If you believe there is a danger of voltage spikes (e. g.
when an electrical storm is building up) disconnect all
your Hi-Fi system components from the mains and the
aerial sockets.
All mains power supply and aerial systems to which the
unit is connected must satisfy the currently valid regula-
tions, and must be installed by an approved electrical
installer.