30
Remote control
General Information
In general terms the remote control buttons have the same function
as the corresponding buttons on the
DAC 8
front panel.
The infra-red sensor for the remote control system is located in the
display area of the
DAC 8.
There must be clear line-of-sight contact
between the
F8
handset and the screen.
The following tables show the remote control buttons and their
functions when operating the machine.
(red)
Switches the
DAC 8
on and off.
Buttons for source selection
Toggles between the co-ax inputs
S/P-DIF 1
and
S/P-DIF
2.
Toggles between the co-ax inputs
S/P-DIF 3
and
S/P-DIF
4
.
Toggles between the optical input
OPT
and the co-ax
input
BNC
.
Toggles between the balanced
AES/EBU
input and the
USB
input.
This button toggles between normal and inverse signal
phase.
Toggles between FIR
1
and FIR
2
oversampling.
Toggles between the two types of
Bezier
oversampling.
With the
button, the bandwidth of the analogue
output filter can be switched between 60 kHz (normal
mode) or 120 kHz (
'
WIDE
'
mode).
(yellow)
Switches the output signal on and off (MUTING)
-
+
(yellow)
In stand-alone operation:
Increases / decreases the volume
(only possible when the switch on the back of the
DAC 8
is
set to ‘VRBL’, or when headphones are connected)
