1.1A
Assemble Back
1.2A
Secure with S02 screws.
1.1B
Secure with S02 screws.
1.2B
28”
(711 mm)
L02B
L02A
S01
QTY
4
6
#S01
#S02
QTY
1
1
1
1
#L03C
#L03D
Profile
Connector
QTY
Profile
#L02A
#L02B
Line up bottom hole on short side of
connectors S01 with hole on side of
profiles L03C and L03D.
Slide short side of connector S01 into channels of profiles L02A and L02B.
Line up last hole on connector S01 with hole in each profile.
28”
(711 mm)
L03C
L03D
S01
S02
S02
Place all the parts for the back face on a level surface.
Make sure the pieces are in the correct positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
!
The back is assembled with the outside face to the ground. ALL VIEWS ARE SHOWN FROM INSIDE.
IMPORTANT: The holes are not at the midpoint of the profile.
Arrange profile so the 28” portion will be the bottom when standing.
6 of 56
www.stcny.com
NOTE: ALL VIEWS ARE FROM INSIDE.
!
Summary of Contents for Easy2Build
Page 2: ......
Page 59: ...Notes...
