Systems Trading Corporation Easy2Build, Assembly Instructions Manual

Page: 36 / 60

Set up one side facing inside with L07C next to the back. Slide shelf
profile L14B into connector S03 until it clicks into place. Slide shelf
profile L14D into connector S39 until it clicks into place.
Carefully slide left side into back, lining
up connectors with profiles. Move side so connectors S09 and S04
are half way into profiles L07C and L01D. Connectors S37 rest on
top of profile L04F. Push side in until connectors click into place.
Secure connectors S37 to profile
L04F with two S02 screws.
With the outside facing a wall, carefully stand back up and lean against the
wall. Stand each side up and place next to the back. Both sides are identical
until the shelf profiles are connected. Make certain that positions of profiles
L07A and L07B match the diagrams before connecting.
!
Connect Sides to Back
S39
S03
L14B
L14D
L07D
L07C
L07C
S09
L01D
S04
6.1A
6.1B
QTY
2 #S02
Screw
L04F
S02
S02
S03
S39
L14D
L14B
Connectors S03 and S39 CLICK into place.
Connectors S04 and S09 CLICK into place.
There is only one way to properly fasten connectors into profiles. Line up parts
first to ensure correct placement. Slide connectors until they CLICK securely into
profile. Use WD40 or liquid soap if pieces do not easily slide together. Wear gloves.
!
VIEWS FROM INSIDE.
S37
L04F
S37
L07C
L01D
L04F
L14D
L14B
S09
S04
S37
S37
34 of 56 www.stcny.com