SystemAir X-MUB-CAV/VAV 100 630EC-20, Installation And Operating Instructions Manual

Page: 47 / 145

11 De-installation / Dismantling
WARNING
Hazard from electrical voltage
›
Switching off and de-installation only by a trained electrician or trained and instructed qualified personnel.
›
Pay attention to the 5 rules of electrical engineering:
–
clear (all-pole separation of an electrical system from live parts)
–
secure against switching on again
–
establish freedom from voltage
–
earth and short-circuit
–
cover or fence off neighbouring live parts.
"
Disconnect all electrical lines carefully.
"
Separate the Multibox and the supply connections.
CARE
Hazard from blows and cuts.
›
Wear protective gloves when dismantling.
›
Dismantle carefully.
"
Remove the fitting material carefully.
"
Place the Multibox on the floor.
12 Disposal
Both the device and also the transport packaging comprise recycling-capable raw materials to a great extent.
12.1 Disposing of the Multibox
If the Multibox is to be finally dismantled and disposed of, proceed as follows:
"
Switch the Multibox free of voltage.
"
Separate the Multibox and the supply connections.
"
Dismantle the Multibox into its component parts.
"
Separate the parts resulting from this according to
–
reusable components
–
material groups to be disposed of (metal, plastic, electrical part etc.)
"
Ensure that the parts are recycled again. Pay attention to the national directives.
12.2 Disposing of packaging
"
Ensure that the parts are recycled again. Pay attention to the national directives.
48