SystemAir TFSK 160 EC, Operating And Maintenance

Page: 6 / 108

6 | EN
206268 | A024
this field or carried out with the supervision
of a suitably qualified person.
Maintenance, Service and Repair
Prior to maintenance, service or repair, make
sure that:
-
Power supply is interrupted (all-pole circuit
breaker).
- Fan impeller has come to a complete
standstill
- Observe personnel safety regulations!
The fan should be cleaned when necessary, at
least 1/year to avoid imbalance and
unnecessary damage to the bearings. A filter
will further improve the time interval between
cleaning of the fan. (It is sometimes
recommended to install a filter guard). The fan
bearings are maintenance free and should only
be replaced if damaged. Do not use a high-
pressure cleaner (steam jet) when cleaning the
fan. Make sure the fan impeller's balance
weights are not moved or the fan impeller
distorted. Listen for abnormal operating noise.
The following applies in case the fan has
stopped:
-
Try to restart the fan by cutting the power a
couple of minutes.
- Ensure that the impeller is not locked.
Possible obstruction to be removed after the
current has been switched off. Check that the
fan starts after reconnecting the current. If
the fan does not start, please contact your
place of purchase.
Disposal and recycling
Residential products with this symbol at the
nameplate are compliant to the WEEE directive.
When disposing the unit, follow your local rules
and regulations.
This product packing materials are recyclable
and can be reused. Do not dispose in household
waste.
For labelled components such as for example
fans, the disassembly instructions can be found
on the component manufacturer’s homepage.