Menu Level 1
Menu Level 2
Menu Level 3
Explanation
Functions
Digital output
Digital output
1:
SF 67%
2:
EF 67%
3:
Rot ON/OFF
4:
ALARM Y/N
5:
Dmp Y/N
6:
Heater Y/N
Shows
The current status
of digital outputs 1–6 (the
settings in the column to the
left are examples).
1: SF 67%: Current set
speed of the supply air fan
(shown as percentage of the
maximum speed).
2: EF 67% Current set
speed of the extract air fan
(shown as percentage of the
maximum speed).
3: Shows if the rotor is active
or not. Unused for unit with
counter flow heat exchanger.
4: Alarm Y/N: Indicates if the
sum. alarm is active or not
5: Dmp OFF:
Outdoor/exhaust air damper
is on or off.
6: Heater Y/N: Indicates if the
electrical re-heater is active
or not.
External sensors
External sensors
CO2:
0 ppm —
RH: 0% —
Last valid value is presented
for the bounded sensors.
Highest actual sensor
signal presented via
–/modbus/wireless.
Unbound sensor presented
as – (none).
Modbus sensors has priority
over wireless sensors.
SAVE VTR 200/B
Installation and Service
208061
30
Systemair Sverige AB
