SystemAir prio 160 E2, Installation And Operating Instructions Manual

Page: 21 / 66

2 Important safety information
2.1 Safety notes
Designers, installers and operators are responsible for the proper mounting and intended use.
•
Only use the circular duct fan prioAir in a proper condition.
•
Provide generally prescribed electrical and mechanical protective devices.
•
During mounting, commissioning, maintenance and control, secure the place of mounting and the premises for possible prepara-
tions against unauthorised access.
•
Observe rules for safe work.
•
Safety components must not be bypassed or put out of function.
•
Keep all the warning signs on the fan complete and readable.
•
Regularly instruct the personnel about safety-conscious behaviour.
NOTE
We have carried out a risk assessment for the circular duct fan prio Air . However, it can only apply to the circular
duct fan prio Air itself. After installation of the circular duct fan prio Air , we recommend to carry out a risk
assessment for the whole system. In this way, you have the guarantee that there is no risk potential from the
system.
2.2 Personnel
2.2.1 Mounting personnel
•
Mounting may only be carried out by trained, qualifi ed personnel.
2.2.2 Work on the electrical equipment
•
Work on the electrical equipment of the fan may only be done by a qualifi ed electrician or electrotechnically edu-cated person.
This person must know the relevant safety rules to recognise and avoid potentially risks.
2.2.3 Personnel for operation, use, maintenance and cleaning
•
Operation, use, maintenance and cleaning may only be carried out by trained and authorized personnel. The oper-ating person-
nel must have appropriate knowledge about handling with the circular duct fan prio Air . In the case of a malfunction or an emer-
gency they must react correctly and adequately.
2.3 Intended use
The circular duct fans prio Air are intended for installation in ventilation systems. They can be installed either in duct systems or as
a free sucking fan over a nozzle and a sucking side protection grid. A free blow-out and/or suction device via a contact-protection
grid is possible following consideration in the design.
•
The circular duct fans prio Air are suitable for extraction of clean air, air with a low dust and grease content, media up to max.
density of 1,3 kg/m³ and a maximum permissible humidity of 95 %.
•
The maximum permissible operating data on the name plate apply for an air density ρ = 1,2 kg/m³ (sea level) and a maximum
air moisture of 80 %.
•
The circular duct fans prio Air are suitable for the following conveyed medium temperature range:
–
prio Air EC from -25 °C to +55 °C
–
prio Air E2 from -25 °C to +55 °C
21
Important safety information