SystemAir PKI-C EI120S, Manual, Page: 58 / 63

15
Safety notes:
Servo drive is assigned for use only based on above
specified parameters. Be careful with power supply!
Adjusting, mounting, and getting the drive to operation
are allowed only for damper producer. Delivery of
servo drives is from this reason carried out directly
from the servo drive producer to damper producer.
Damper producer is responsible for safe and reliable
damper operation. Dampers with servo drive must be
certified according to STN EN 1366-1. Servo drive can
be opened and repaired only by the producer. Servo
drive contains electronic and electric components.
Regulation
Open-Close AC 250 V
2-wire open-close control.The actuator is overload-
proof and can thus remain energized even
at the end stops.
Signaling
Two micro switches with fixed settings are installed in
the actuator for indicating the damper end positions.
The position of the damper blade can be read off on a
mechanical position indicator.
Manual operation
The crank handle supplied with the actuator allows it
to be operated manually.
Important note
The producer must have the damper certified accord-
ing to STN EN 1366-10.