Drawings, diagrams, guides and instructions for the use, maintenance and repair |
11
D.3
The control panel for the control system.
The control panel is delivered in a cardboard box containing the other external control components. This cardboard box
is usually placed in the section with the supply air fan. The Operator’s Guide (also called The User’s Guide) is one of the
annexes delivered with this – User Manual.
This is the NaviPad control panel for the Access control
system from Systemair.
The control panel is connected by a cable to the controller
in the cabinet. The control panel is delivered with 3 me-
ters of cable and up to 100 meters of cable of the same
type can be added.
D.4
Dimensions of the units
See Annex 2 with information about the exact dimensions.
D.5
Ordinary automatically operation – only manual operation by new parameters
The unit is operating fully automatically and manual operation includes only selection of new parameters via a hand ter-
minal. The alternative is that the controller is connected to a BMS system with the ability to select new parameters via
PC, tablet or SmartPhone.
E
Drawings, diagrams, guides and instructions for the use, maintenance and
repair
All units are manufactured in compliance with the EC Declaration of Conformity and they are CE marked as machines.
Unique Declaration with production number of the machine is an integral part of the machine – enclosed as Annex 1 to
this manual. If the buyer carries out changes or adds components in or on the machine, the buyer must issue a new EC
Declaration of Conformity and a new CE marking of the machine.
To promote correct use of the machines, the below-mentioned instructions are an integral part of the machine:
• Unique drawings, data and description of functions for the delivered unit – Annex 2
• Instructions for use of the machine – chapter K in this manual
• Instructions about adjustment and maintenance – chapter R in this manual
• Safety during adjustment and maintenance – chapter S
• Wiring diagram.
• Operator’s Guide (also called User’s Guide).
F
Employees in charge of operation/control/maintenance
The units are constructed and built with a fully integrated control system. After start-up and hand-over from installer to
operators/users, the unit operates fully automatically.
Indications of operating status as well as indication of faults are visible in the display at the hand terminal. The opera-
tors/users can enter new parameters in the controller via the hand terminal. Alternatively, the controller can be con-
nected to a BMS system so that new parameters can be selected via PC, tablet or Smartphone. The operators/users do
not need to open inspections doors for the operation.
Skilled technicians must take care of maintenance as well as repairs.
output |