The unit is not designed to withstand weights or stresses from adjacent equipment, pipe work or
constructions. Any foreign weight or stress on the unit structure could lead to a malfunction or a
collapse with dangerous consequences for personnel and property. In such an event, the warranty
shall be null and void.
Caution
The unit base shall be arranged as indicated in the manual. There could be a risk of personal injury
or damage to property in the event of the unit being incorrectly supported.
Caution
Do not expose the
SYSAER R32
to rejections from chimneys or vents. Fumes charged with soot or
grease as well as acid rejections are likely to clog or damage the condenser irreversibly. This would
cancel the warranty.
Caution
20 SYSAER R32
10. INSTALLATION
The
SYSAER R32
must be installed outdoors with sufficient surrounding clearance to enable unobstructed
air circulation through the appliance and access for maintenance work.
In the case of the unit being sited in areas exposed to high winds, you must avoid the wind hitting the
fan blowing surface areas directly to avoid any risk of recycling cooled air. Exchanger fan operation can be
disrupted by strong winds, which can cause de-icing problems and fan malfunctions.
²
The building structure must be capable of carrying the weight of the unit during operation.
²
The place of installation must not be subject to flooding.
²
The
SYSAER R32
should be installed on a flat, clean surface without any obstacles. The surface area
must be sufficient to spread the weight of the unit over the building structure.
²
It must be high enough to permit good drainage of defrost water with siphon
²
Keep duct connections to a minimum to reduce pressure drop.
²
Ensure that the recommended free clearances around the unit are maintained to avoid any risk of
malfunctions.
²
The installer is responsible for providing the weatherproof seal between the building and the
SYSAER
R32
. The installer must be fully versed in the practice of roof mounted equipments and must comply
with the recommendations and rules detailed in the Technical Directives.
²
In order to avoid risk of condensation and energy losses, all outdoor ducting and piping must be
insulated.
²
The unit’s tightness must not be deteriorated by power supply connections.
10.1. SITING THE INSTALLATION
10.1.1. PREVAILING WIND
Summary of Contents for AC-RSR105R32HEC
Page 2: ......
Page 43: ...APPENDIX ANNEXE ANLAGE ALLEGATO ANEXO APPENDIX ANNEXE ANLAGE ALLEGATO ANEXO...
Page 78: ......
