Systec & Solutions PILOT 219, Instructions For Use Manual

Page: 26 / 43

Fig. 20: Interface plate on the rear of the PILOT 219 PC (depending on the
configuration)
4.
Connect up all the cables between the interface plate and the
equipment rack adapter.
5. Tighten the screws on the mains plug.
6. Fasten the PILOT 219 PC to the equipment rack adapter using the
four M5 x 16 screws.
You will find a view of the backplane in section
Ä
Chapter 3.4
“Dimensions” on page 16 .
1512
222
734,82
222
1160
Fig. 21: Screw connections on the equipment rack adapter
ð
The PILOT 219 PC is now mounted.
Starting up
Mounting the device
PILOT 219 PC - Industrial PC 26