Systec & Solutions PILOT 219, Instructions For Use Manual

Page: 32 / 43

5.5 Using the optional USB connection
Unscrew and remove the dummy plug on the left-hand side of
the PILOT 219 PC.
ð
The optional USB connection is now accessible.
When closing the USB connection, make sure it is
screwed tight, otherwise the IP65 protection level can
no longer be guaranteed.
Firmly screw the dummy plug into place on the left-hand side of
the PILOT 219 PC.
ð
The optional USB connection is firmly screwed shut.
5.6 Setting up the WLAN (optional)
The WLAN antenna together with the WLAN USB stick are
located in the equipment rack adapter.
The WLAN USB stick may be connected only directly to a USB
interface with no interposed USB hub.
Install the WLAN driver from the supplied USB stick.
ð
The WLAN is set up.
5.7 Hard disk LED (optional)
The hard disk LED flashes when the internal HDD hard disk is
accessed.
This is, however, possible only for HDD disks.
Opening dummy plugs
Closing dummy plugs
Operation
Hard disk LED (optional)
PILOT 219 PC - Industrial PC 32