Systec & Solutions CONTROL 217 PC, Instructions For Use Manual

Page: 31 / 41

n
SCOPE
This customer information applies to the following devices manu-
factured by Systec & Solutions GmbH:
– CONTROL 217 | 218 | 219 | 221 | 224 | 232
– PILOT 215 | 217 | 218 | 219 | 221
– WAVE 219 | 221 | 224 | 232 | 255
n
PURPOSE
This document serves to inform customers about product attrib-
utes. The information is provided by the manufacturer or supplier.
The information and recommendations it contains are made to the
best of our knowledge and belief. Users should carry out their own
investigations to establish usage and application recommenda-
tions relating to products’ suitability for their particular purpose.
Systec & Solutions GmbH
Emmy-Noether-Straße 17 | 76131 Karlsruhe | Germany
Phone +49 721 6634 400 | Fax +49 721 6634 444
talk@systec-solutions.com | www.systec-solutions.com
5.5 Using the optional USB connection
Unscrew and remove the dummy plug on the front of the CON-
TROL 217 PC.
ð
The optional USB connection is now accessible.
When closing the USB connection, make sure it is
screwed tight, otherwise the IP65 protection level can
no longer be guaranteed.
Firmly screw the dummy plug into place on the front of the CON-
TROL 217 PC.
ð
The optional USB connection is firmly screwed shut.
5.6 Setting up the WLAN (optional)
The WLAN antenna together with the WLAN USB stick are
located in the equipment rack adapter.
The WLAN USB stick may be connected only directly to a USB
interface with no interposed USB hub.
Install the WLAN driver from the supplied USB stick.
ð
The WLAN is set up.
Opening dummy plugs
Closing dummy plugs
Operation
Setting up the WLAN (optional)
CONTROL 217 PC - Industrial PC 31