Systec & Solutions CONTROL 217 PC, Instructions For Use Manual

Page: 35 / 41

7 Storage
7.1 Unmounting the device
WARNING!
Risk of injury from electric shock!
Assembling and connecting plug connectors while
voltage is connected may lead to life-threatening injuries.
– All work on the device must be carried out when the
supply line is free of voltage.
– Never plug in or unplug the power supply plug when
live with voltage.
– The supply cable must not be supplied with voltage
until assembly has completely finished.
WARNING!
Danger of injury due to excessive load.
Working on heavy equipment may lead to serious injuries.
– Always have two people when working with heavy
equipment.
WARNING!
Danger of injury from hot surfaces.
Power transmission and regulatory components become
hot in operation and may lead to injuries.
– Allow these components to cool down before you
begin dismounting the device.
NOTICE!
Danger of material damage from live equipment.
Working on live equipment may give rise to material
damage.
– Before you carry out any work on a device: Disconnect
it from the power supply.
You will need the following tools:
n
Allan key (4) for M5 x 16
1.
Clean the device (see
Ä
Chapter 5.4 “Cleaning the device”
on page 28 ).
2.
Release the nuts from the M6 bolts on the back of the front panel.
3.
Remove the device from the wall cutout.
ð
The device is unmounted.
Storage
Unmounting the device
CONTROL 217 PC - Industrial PC 35