Systec & Solutions CONTROL 217 PC, Instructions For Use Manual, Page: 28 / 41

If the stick is not available: Send an e
‑
mail to
support@systec-hardware.com .
Install the installation files on the supplied USB stick.
If the stick is not available: Send an e
‑
mail to
support@systec-hardware.com .
When G-Touch Controller:
1.
Launch Tablet PC Settings in Windows’ Control Panel.
ð
A new window opens up.
2.
Choose the Calibration option.
3.
Further instructions follow.
ð
The touchscreen is correctly calibrated.
When resistive Touch:
1.
Install the installation files on the supplied USB stick.
2. Calibrate touchscreen within the installed software.
ð
The touchscreen is correctly calibrated.
5.4 Cleaning the device
To prevent malfunctions or incorrect data entry due to inadvertent
operations: Switch the device off before cleaning it (see Ä
Chapter 5.2
“Switching the device off” on page 27 ).
NOTICE!
Damage caused by cleaning.
Cleaning the device may give rise to material damage.
– Firmly close all screw connections.
– Do not use high-pressure or steam cleaning equip-
ment.
– Do not use any abrasives or hard materials.
– Clean the display without applying any excessive pres-
sure.
1. Regularly clean the surface of the device using a soft, moist, lint-
free cloth.
2.
For more significant soiling: Use isopropanol as cleaning agent.
Note the information in the following chemical resistance data:
Windows 7 and higher
Calibrating the touchscreen
Windows 7
Operation
Cleaning the device
CONTROL 217 PC - Industrial PC 28