机床产品
/Machine Tool Products
–
60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
How to Operate 60 Series Controller
–
a.
b.
c.
d.
e.
f.
g.
h.
•
•
•
•
•
•
•
•
•
•
•
•
Path: F3 Offset/Setting
→
F1 Workpiece Coord.
Move cursor to the required coordinate with
and page
, page
Able to directly enter the target value
Able to enter the current machine coordinate with "Apply Mach. Coord."
Able to enter the current relative coordinate with "Apply Rel. Coord."
Able to enter the current auxiliary coordinate with "Apply Aux. Coord."
Press "Apply Mach. Coord. Inc." after entered the increasing value, the system will add the
entered value to machine coordinate and fill in to workpiece coordinate automatically.
Press "Inc. Input" after entered the increasing value, the system will add the entered value to
workpiece coordinate automatically.
5.3.2 Tool Prepare
Tool Set
Purpose
We can set the length and the diameter geometry and wear
Operation condition
Can be used at Manual or Auto mode
Wear value increment upper limit is 1.0, warning will appear if exceed 1.0.
Operation method
Use direction key
【
↑
】【
↓
】【
←
】【
→
】
move the cursor.
Use
【
PageUp
】【
PageDown
】
switch the page.
Key in method: Absolute, Increment, Measure method.
Absolute: for radius and length compensate.
Increment: for radius wear and length wear.
Radius comp radius wear = real G41/G42 compensate.
