机床产品
/Machine Tool Products
–
60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
How to Operate 60 Series Controller
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
INC JOG mode is selected
Operation:
Press axis direction key (X+, X-,Y+,Y-,Z+…) and machine moves toward the selected direction.
Cannot be constantly triggered like JOG or rapid JOG mode, INC JOG mode only moves once with
a fixed distance when axis direction key is pressed once
The fixed distance in INC JOG mode can be selected by percentage movements as below:
X1
:
Distance 0.001mm
X10
:
Distance 0.010mm
X100
:
Distance 0.100mm
These percentage movements are shared with MPG mode
MPG
Function:
Control axis movement toward the selected direction
Condition:
System is on "Ready" state
MPG mode is selected
Operation:
Press axis direction key (X+, X-,Y+,Y-,Z+…) or turn the direction switch on the manual pulse
generator for the direction to move.
Turn the dial on manual pulse generator clockwise / counterclockwise for forward / reverse
direction.
The moving distance when turning one track in MPG mode can be selected by percentage
movements as below:
X1
:
Distance 0.001mm
X10
:
Distance 0.010mm
X100
:
Distance 0.100mm
These percentage movements are shared with INC JOG mode
5.2.2 Machining Process
AUTO
Condition:
System is on "Ready" status
AUTO mode is selected
Operation:
Press
「
CYCLE START
」
button
System will machine the current machining program
System status will be switched from "Ready" to "busy" and backs to "Ready" when machining is
finished
Single Block
Function:
Excute each single block in program
Condition:
System is on "Ready" status
Single block mode is selected
Operation:
Press
「
CYCLE START
」
button