7
Chapter
2
Chapter 2:
Hardware Setup
Tools and Parts for Drive Installation
A screwdriver
At least one 3.5” or 2.5” SATA drive (Please visit
www.synology.com
for compatible drive models.)
Warning:
If you install a drive that contains data, the system will format the drive and erase all data. If you need the
data in the future, please back it up before installation.
Install Drives
1
Pull the drive tray handle in the direction as indicated below to remove the drive tray.
2
Load drives in the drive trays:
For 3.5" drives:
Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive.
For 2.5" drives:
Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive.
