11
Chapter 2: Hardware Setup
Remove RAM Module from RackStation
1
Follow steps 1 to 2 of “Install a RAM Module” to remove the circuit board.
2
To remove the RAM module, follow the steps below:
a
Release the levers on the memory slot by pushing outwards simultaneously.
b
Hold the memory module by the edges and remove it from the slot.
3
Follow step 4 of “Install a RAM Module” to replace the circuit board.
Start up the RackStation
1
Connect one end of each power cord to the power ports located on the back of the RackStation and the other
end to a power outlet.
2
Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub.
3
Press the power button to turn on your RackStation.
Your RackStation is now online and detectable from a network computer.
