![background image](http://html1.mh-extra.com/html/synergy/sygs/sygs_operation-manual_1420715007.webp)
5
INTRODUCTION
This manual contains instructions needed to
configure your remote, wall-mounted Synergy
Graphical Control Station, or SYGS, and to modify
initial factory settings.
The SYGS is an architectural lighting-control station
that allows you to program and recall various light
levels. The available settings will allow your system to
meet a wide variety of applications.
The SYGS is operated by menus and buttons
displayed on an easy-to-use, touchscreen graphic
keypad. Using this keypad, you can control lighting
attributes (fade times, levels) of multiple targeted
lighting groups (called Presets or Scenes), by
adjusting multiple lighting circuits (called Channels
or Zones) within each targeted group.
The SYGS Graphical Control Station you have
purchased was engineered to provide years of
reliable operation for commercial applications.
If assistance beyond the scope of this manual is
required, contact Synergy Lighting Controls.
NOTE: Operational Requirement
The SYGS is dependent on the Synergy controller
to provide preset and channel functions. The SYGS
must be programmed through the Synergy controller
before it will provide any functionality. Please refer
to Synergy Config instructions for station setup
instructions.
34
recall preset/saved light levels?
modify present/saved light levels?
adjust light levels?
identify the target locations?
identify the lights within a target location?
change target-location labels?
check the firmware version?
determine target locations being controlled?
determine target-location lights being controlled?
restore factory default programming?
check the firmware version?
36
37
37
37
38
38
39
Summary of Contents for SYGS
