Synel Industries Ltd.
5
Stand-Alone Terminals
Installation
6.
Close the unit.
7.
Replace the screw covers.
Option B
1.
Remove screw covers and screws from top and bottom of the unit.
2.
Hold the unit against the wall and mark the drilling location through
the screw holes.
3.
If the cable wires use the middle hole option, remove the back panel
and use it to mark the position of the cable hole (center of panel). Drill
the cable hole in the wall.
4.
Drill the two fastening holes in the wall.
5.
Connect the cable wires via middle hole or bottom hole option (see
diagram) as required.
6.
Fastened the unit to the wall with screws provided.
7.
Replace the screw covers.
PRX-40/A Mounting
A.
Open screw covers
and screws.
C. Drill holes
PRX-40
Bottom hole option
PRX-40 Back
P
l
Location of screws for
option “B” fastening.
Option “A”
Option “B”
B. Remove Back Panel
Center hole
ti
