16
Synel Industries Ltd.
Set-up mode
Stand-Alone Terminals
swipe all relevant cards. After each swiped card 2 short beeps will indicate
that the number was registered successfully. After swiping all cards press
7&8 simultaneously (mandatory) (press
Enter
in terminals that consist of
such a key) in order to revert to normal mode.
Note: In set-up code 12: operation mode no. 4 - card and pin code, the user
must swipe the card and then key-in the code (a 4 digit code).
Delete list:
After entering set-up mode key-in code 21 (delete card by card) and swipe all
irrelevant cards. After each swiped card 2 short beeps will indicate that the
number was deleted successfully. After swiping all cards press 7&8 simulta-
neously (mandatory) (press
Enter
in terminals that consist of such a key) in
order to revert to normal mode.
Cards that were registered in operation mode 0 (card only) and the device is
currently in mode 5 or 6, these cards will now be allowed access without fin-
gerprint verification.
Note: Whenever a task is completed successfully, a LED flashes and the
buzzer beeps.
By index (PRX-40/A only)
Insert cards:
After entering set-up mode, key-in code 24 (Insert card by Index) and key-in
a 4 digit index, swipe card. 2 short beeps will indicate that the number was
registered successfully.
Delete cards:
After entering set-up mode key-in code 25 (delete card by index) and key-in a
4 digit index. 2 short beeps will indicate that the card was deleted success-
fully.
In operation modes 5 or 6, cards that were registered by index will be allowed
access without fingerprint verification.
Terminology
Card Only - Control is performed by Card only.
Global Code only - common global code (4 digit code – used by all card-
holders).
Card or code - Control is performed by Card or keying-in number of card (the
length of the keyed-in number must be identical to the defined card length).
Card and Global Code - Control is performed by Card and a common global
