Torque wrench (with Hex and Torx drivers)
2.5 and 4 mm Hex keys
T10 and T25 Torx keys
Cutting guide (Park Tool SG-6)
Hack saw and a high-quality 32 TPI blade
Fine metal file or deburring tool
Isopropyl alcohol
Light-strength retaining compound (LOCTITE 222)
Medium-strength retaining compound (LOCTITE 243)
MOTOREX Bike Grease
Assembly paste (carbon paste)
WARNING:
Your bike may require additional tools to what is mentioned above and we cannot guarantee that these recommendations will cover the
requirements of all bikes. If in doubt, ensure assembly is handled by a qualified bicycle mechanic, experienced with the assembly and setup of a time trial
bicycle.
WARNING:
Do not attempt to modify your Sync components, outside of what is described within this setup guide as appropriate for assembly. Modification
may impact the structural integrity of the components and could result in component failure, or failure of the complete system. Sync Ergonomics is not liable
for product damage and/or personal injury resulting from improper assembly.
