Thanks to the connection at the
shifter, you can run the Di2 wires through the spacer
stack during assembly, leaving sufficient length to
connect the shifters as a final step.
The wires will run through the basebar adapter/s,
through the spacers, clamp adapter and carbon
brace, into the clamp and up and out of the
extensions. Install your TT grips before finally affixing
your shifters in place.
Due to the nature of the wiring of
SRAM CLICS, it is important that you establish the
correct fit on your EVO setup prior to wiring the
shifters. Disassembly will be required before
reassembly with the SRAM wires passed through
each component.
Once you have completed installation of the
extensions and finished wiring the shifters, complete
the clamp assembly by securing the top caps,
ensuring each top cap screw is torqued to 2 Nm.
2 Nm
