When cut to the correct length and height, secure the
extensions in the EVO extension clamps with the two
grub screws provided (pre-inserted into the clamps).
We recommend the application of a light textured
carbon paste between the extension and the inside of
the clamp to ensure a secure fit. Successive loosening
and tightening of these screws over time, will require
reapplication of retaining compound (LOCTITE 222).
WARNING:
Ensure you do not crush tubes by over torquing the
extension clamp screws. The tight tolerance on clamps requires
a round tube for insertion and removal. Crushing may lead to
the inability to remove a tube from the clamp body.
WARNING:
We do not recommend the use of carbon
extensions in EVO Extension Clamps. The grub screw clamping
method is likely to damage a carbon tube and in such
instances, may lead to tube failure.
2.5 Nm
