Synapius ECS 20 Series, User And Installation Manual

Page: 25 / 37

8
Resetting the master code using the PUC code
If the master code is lost or forgotten you can perform a master code reset. To reset your master code
to the factory preset (code 0000) you need the PUC code exclusively assigned to your serial number of
your ECS. This PUC is provided at the moment of product registration and sent to you by e-mail or
provided by your supplier.
The PUC consist of a number combination of eight digits. To use this follow the next procedure.
To clear existing keystrokes
xxxxxxxx Enter the PUC code
Use the CE button to avoid confusion with possible user pin codes
xxxxxxxx enter again the PUC code
Use the CE button to avoid confusion with possible user pin codes
The green LED will flash twice. The master code of your device is now reset to 0000.
Now you can follow the procedure to program your own desired master code.
If the master code and the PUC as well has been lost submit a support form including the serial
number of the device on the Internet site http://www.synapius.com/index.php?support
support request The cost for this PUC code service will be charged.
-
Electronic Code Switches