Synapius ECS 20 Series, User And Installation Manual

Page: 13 / 37

Pro gram ming user pin codes
All the user pin codes are stored into a user pincode list having a specific location number between 1
and 99. The user identity is represented as the location were his pincode is registered. It is advised to a
note the user number and the pincode in a separate list (see appendix A)
To enter a new user pincode follow the next instructions.
Press CE to clear existing keystrokes
xxxxxxxx enter the master code
now, the red LED goes on, which means the device is in programming mode
xx enter the location (user ID number always 2 digits)
xxxxxxxx Now enter your new personal master code (min. 4 - max. 8 digits)
Write down this code (see code list appendix A) and keep it at a safe place.
xxxxxxxx Re-enter the new code
Now the green LED goes on, without switching the relay on.
This means that your new master code has been accepted. If this doesn’t happen, you will
have to start from the beginning.
x enter one digit 0-9 to assign the operating level for this user
Omitting or zero assigns the lowest operating level
Press agian to clear the program mode, green LED goes off
Electronic Code Switches