Synapius ECS 20 Series, User And Installation Manual

Page: 23 / 37

7
Maintenance of the installation
During maintenance or repairing of the installation you may want to switch On and OFF without the
user pincode. Or even you want to prevent that the installation will be used temporarily.
Engine out of operation
To put the engine out of operation by disabling all the user pincodes temporarily follow the next
instructions.
To clear existing keystrokes
xxxxxxxx enter the master code
To set in program mode
3 code 3 to set out of operation
Confirm
To indicate that the machine is out of operation the red LED will flash slowly.
Only the master code will be active now to change to normal mode.
To return to normal mode follow the next procedures:
To clear existing keystrokes
xxxxxxxx enter the master code
Confirm
0, 1 or 2 Enter the E-stop mode you require (see E-stop mode)
Confirm
-
Electronic Code Switches