4
CONTROL PANEL
LAYOUT
Power Saving Mode
The
ATF
2
D
has a power saving mode that protects
and prevents operation of the unit under 11volts DC.
Both LCD readouts will blank and the keypad will
be non-functional until the unit is connected to a
12volt DC supply or the on board battery has been
adequately re-charged.
On Board Battery
The
ATF
2
D
on board battery is very similar to any
other cordless tool with a battery. The more it is
slowly charged at a low rate the better the charge
and longer the battery life. Charging the on board
battery quickly and at a high rate will shorten the
life of the battery and lessen the amount of services
using the on board battery.
The MAIN POWER switch must be in the ON
Position while charging the on board battery.
1.
NEW Fluid Display
2.
USED Fluid Display
3.
INCREASE Fluid Amount
4.
DECREASE Fluid Amount
5.
POWER ON LED
6.
STOP-RESET System
7.
QUARTS / LITERS Mode
8.
EXCHANGE AMOUNT Set
9.
SEMI-AUTOMATIC
EXCHANGE Mode
10.
REVERSE POLARITY LED
11.
READY Indicator LED
12.
AUTOMATIC EXCHANGE
Mode
13.
EMPTY NEW Tank Function
14.
LOW Fluid Level Indicator
15.
DRAIN PAN Function
16.
RESUME REFILL Function
17.
REMOVE FLUID Function
18.
ADD FLUID Function
19.
EMPTY USED Tank Fluid
Function
20.
HIGH Fluid Level Indicator
