12
Semi-Automatic Exchange Process, Easy Reference
Preparation
1)
Run vehicle and check transmission fluid level.
:
2)
Shut-off vehicle and insert dipstick extraction wand–check for fluid.
3)
Connect dipstick extraction wand to auto valve female coupler.
Operation
1)
Connect
ATF
2
D
to vehicle battery
.
:
2)
Turn on Main Power
3)
Select EXCHANGE AMOUNT function.
4)
Enter total amount of fluid to be exchanged.
5)
Select SEMI-AUTOMATIC mode.
6)
Select flashing Drain Pan - fluid extraction begins.
7)
Select flashing Resume-Refill-process will replace fluid extracted
8)
Start vehicle and run for one minute – Shift through gears for at least ten seconds of run time
(NOTE: Run Time Formula,
Page 8
)
9)
Shut off vehicle.
10)
Repeat steps
6-9
until total fluid amount entered at start has been exchanged.
11)
Check fluid level and use ADD or REMOVE functions to adjust.
Automatic Exchange Process, Easy Reference
Preparation
1)
Run vehicle and check transmission fluid level.
:
2)
Shut-off vehicle and insert dipstick extraction wand–check for fluid.
3)
Connect dipstick extraction wand to auto valve female coupler.
Operation
1)
Connect
ATF
2
D
to vehicle battery
.
:
2)
Turn on Main Power.
3)
Select EXCHANGE AMOUNT function.
4)
Enter total amount of fluid to be exchanged.
5)
Select AUTOMATIC EXCHANGE mode.
6)
AUTOMATIC EXCHANGE flashes-
start vehicle.
30-second countdown timer begins.
7)
Auto extraction and re-filling occurs until step 3 amount is reached.
8)
Check fluid level when READY lights and Alert sounds.
9)
Use ADD or REMOVE functions to adjust fluid levels.
