Page 13
SETTING THE PRINTING PARAMETERS
When “
F3 SEr
” is displayed, press
[Zero]
to view the first printing
parameter.
Selecting the communication port
•
The selected port, for example “
S
232
” will be displayed.
•
Currently, only RS-232 interface is available and the balance
is set with this port only.
•
Press
[Zero]
, to view the next printing parameter.
Setting the print mode
•
The current setting of the print mode is displayed,
•
Press
[Unit]
to cycle through the other options.
•
The following options are available:
P1 Prt
The balance sends the accumulated weights to the
communication port, whenever the
[Print]
key is pressed.
P2 Con
It will set the RS-232 interface to print the weights
continuously and the accumulation function is disabled.
P3 AUT
The weighing results will be sent to the communication port
automatically whenever a weight is placed on the platform.
•
Press
[Zero]
, to view the next printing parameter.
Setting the baud rate
•
The current baud rate setting will be displayed.
•
Press
[Unit]
to cycle through the other options.
•
The following settings are available:
b 600
b 1200
b 2400
b 4800
(default value)
b 9600
•
Press
[Zero]
to view the next printing parameter.
Summary of Contents for EC Series
Page 2: ...Page 1 ...