Symmetry EC Series, Operator'S Manual

Page: 10 / 18

Page 9
PARTS COUNTING
•
Before beginning, tare the weight of any container that will be
used, leaving the empty container on the balance.
•
Place the number of samples on the balance. The number
must match the options for parts counting, 10, 20, 50, 100 or
200 pieces.
•
Press the [PCS] key.
•
The balance will initially show "
SP 10
" asking for a
sample size of 10 parts. Press [Units] to cycle through the
options: 10, 20, 50, 100, 200 and back to 10.
•
Press [PCS] again when the number matches the number of
parts used for the sample. As more weight is added the
display will show the number of parts (
PCS
) with respect to
the chosen sample size.
•
Press [Units] to display unit weight (
W/P
), total weight (g) or
the count (
PCS
) . The total and the unit weight are shown in
the current units.
•
Press [PCS] to return to normal weighing.
ACCUMULATION
•
When the balance is set for automatic accumulation, the
weight will be added to the memory when the balance
becomes stable.
The balance must return to zero before
another weight is added !
•
When the balance is set to manual accumulation (See the
Parameter Section) the weight displayed will be stored in
memory when the
[Print] key is pressed and the weight is
stable.
•
The display will show "
ACC 1
" followed by the total value in
the memory for 2 seconds before returning to displaying the
weight of the item on the balance.
•
The weight will be output to a printer or PC.
•
Remove the weight, allowing the balance to return to zero
and put a second weight on.
•
Press [Print] , the display will show "
ACC 2
" followed by the
new total in the memory for 2 seconds before returning to
displaying the weight of the item on the balance.
•
Continue until all weights have been added.