Symmetry EC Series, Operator'S Manual

Page: 7 / 18

Page 6
•
Turn the power on by pressing the [On/Off] switch located
underneath the balance on the right hand side.
•
The unit will display the model number and the software
revision number for a while and then will count down
performing a self-test.
•
When ready the display will show zero along with the
weighing unit selected during the last operation.
KEY DESCRIPTIONS
KEYS
PRIMARY FUNCTION
SECONDARY FUNCTION
[Zero] Sets the zero point for all
subsequent weighing. The display
shows zero. A secondary function is of " Enter " key
for setting parameters or other
functions.
[Tare]
Tares the balance. Stores the
current weight in memory as a tare
value, subtracts the tare value from
the weight and shows the results.
This is the net weight. Pressing [Tare] again will cancel the
tare value.
[%] Enters the percent weighing
function.
When in percentage mode, press [%]
key to return to normal weighing mode.
[PCS] Use this key to enter counting
mode from the normal weighing
mode, A secondary function allows the user to
return to normal weighing mode while in
counting mode. It also clears the
accumulated value from the memory
when pressed during recalling the total.
[Units] Pressing this key will cycle through
the weighing units which are
enabled. It also scrolls through the
options during setting up a
parameter. Displays the unit weight , total weight
and the count when in the parts
counting mode.
[Print] To print the results to a PC or
printer using RS-232.
It also adds the value to the
accumulated memory if the
accumulation function is not
automatic. Secondary function is to return to
normal operation when the scale is in a
parameter setting mode.