manualshive.com logo in svg

Symmetricom TimeSource 500, User Manual

Share
Download
Symmetricom TimeSource 500 User Manual Download Page 200

200

TimeSource 3500

TL1 Reference

097-72050-01 Issue 7: August 2003

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

4

Edit Equipment (cont’d)

Notes:

5. If the dbinit jumper is changed, the NTP password has to be re-

entered.

6. A span must have been put into service using the ENT-EQPT 

command before setting the ENSEMBLER and SSM 
parameters.

7. When setting alarm integration time (SEVERITY or SERAFF), 

the type of alarm (HOLDOVER, GPS, LOS, AIS, or ERROR) has 
to be specified. For example, ED-EQPT::TS3500:CTAG:::
ALARM=HOLDOVER, TIME=72-00, SEVERITY1=EV,
SERAFF1=NSA, SEVERITY2=MJ, SERAFF2=SA; will generate a 
holdover event as soon as the condition is detected with an NSA 
flag. Once this condition has existed for 72 hours, TS3500 will 
generate a major alarm with an SA flag. These parameters can 
then be verified using the RTRV-EQPT command.

8. All commands on DCDUSERPORT having TID which equals 

SID of the DCD are forwarded to the DCD. Similarly, the 
responses from the DCD are sent to the provisioned 
DCDUSERPORT.

Response Format:

<sid> <date> <time>

M <ctag> COMPLD

/*LINK:<link>,CMD:<command>*/

;

Summary of Contents for TimeSource 500



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands