Symbol PDT 8000, Product Reference Manual

Page: 90 / 376

2-34
PDT 8000 Series with Windows
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
3. Press either the right or left scan trigger. Make sure the red scan beam covers the
entire bar code. The green scan LED lights and a beep sounds to indicate a
successful decode.
Figure 2-20. Scanning with PDT 8056
Scan LED Indicator
See Parts of the Terminal on page 1-4 for the location of the Scan LED on the terminal.
Resetting Your Terminal
If the terminal stops responding to input from buttons or the screen, reset it by performing
a soft or hard reset.
Performing a Soft Reset
A soft reset restarts the terminal and saves all stored records and entries. Ensure that your
terminal is awake before performing a soft reset. If necessary, press the Power key to wake
up your terminal.
Caution
Files that remain open during a soft reset may not be retained.
Table 2-3. Scan LED Indicator
LED Status Indication
Off Not scanning.
Solid Red Laser enabled. Scanning in process.
Solid Green Successful decode.