Symbol PDT 8000, Product Reference Manual

Page: 137 / 376

4-37
Communications
2. On the terminal, tap Start - Settings - System - eConnect and ensure the following
settings are made:
Figure 4-18. eConnect Settings - Ethernet ActiveSync Setup
3. Tap the
OK
button.
4. Insert the terminal into the cradle. The cradle’s communication LED turns red, then
flashes green, indicating that the host computer and terminal are communicating.
See
Communication LED Indicator on page 4-39 for other indications.
5. On the terminal, a succession of dialog boxes appear, indicating the status of the
connection. When successfully connected and synchronized, the status of the host
computer is Connected/Synchronized.
Note: If the terminal is removed from the cradle while the LED is flashing
green, communication is disrupted and data may be lost. When the
terminal finishes communicating, the slot’s LED turns solid green
until the terminal is removed from the slot.
6. To close the ActiveSync session, tap
Stop
. You may remove the terminal when the
connection has closed itself.