Symbol ORG SPT 1550, Product Reference Manual

Page: 65 / 272

2-31
Working with Your SPT 1550 Terminal
• An application installed in RAM memory.
To beam information:
1. Locate the entry, category, business card or application you want to beam.
2. Tap the icon.
3. Tap the Beam command from the Record menu to open the Beam Status screen.
4. Point the IR port directly at the IR port of the receiving SPT 1550 terminal.
Tip: For best results, the SPT 1550 terminals should be between 2 inches and 5
inches apart, and the path between the two devices must be clear of obstacles.
5. Wait for the Beam Status screen to indicate that the transfer is complete before you
continue working on your SPT 1550 terminal.
To receive beamed information:
1. Turn on your SPT 1550 terminal.
2. Point the IR port directly at the IR port of the transmitting SPT 1550 terminal to open
the Beam Status screen.
3. Tap the Yes button to accept the transmission.
4. Wait for the Beam Status screen to indicate that the transfer is complete, then tap
the
OK button to display the new entry.
Note: Incoming entries are filed under the “Unfiled” category.