Symbol ORG SPT 1550, Product Reference Manual

Page: 26 / 272

1-6
SPT 1550 Product Reference Guide
Installing the Batteries
To use your SPT 1550 terminal, install two AAA alkaline batteries behind the battery door
on the back of the SPT 1550 terminal.
To install the batteries:
1. Press the latch on the battery door and lift the battery door away from the SPT 1550
terminal.
2. Install the two AAA alkaline batteries into the battery compartment.
Note: A diagram in the interior of the battery compartment shows the
orientation of the + and - ends of the batteries. When correctly
installed, the clips in the battery compartment secure the batteries in
place.
3. Insert the battery door back into place so that it is flush with the back of the SPT
1550 terminal and “clicks” into position.
Contrast control Adjusts the appearance of the screen for the clearest screen display.
Depending on the lighting conditions or temperature of the environment
where you use your SPT 1550 terminal, you may need to adjust the setting
of the contrast control.
Battery door Covers the batteries that power your SPT 1550 terminal. See Installing the
Batteries for information on removing the battery door and installing
batteries.
Press tab to open