Symbol NetVision NP-3010, User Manual

Page: 11 / 12

Data Phone Ring Styles
This feature allows NetVision Data Phone users to select different rings to announce incoming phone
and intercom calls. You can also add the vibrator to the ring selection.
Tone 1 One-second beep
Tone 2 Two short beeps
Tone 3 A half-second beep
Tone 4 A two-second beep
Tone 5 One short beep
Tone 6 Five short beeps
LED-only Repeated LED flashes
Vibrator Repeated brief vibrations
To set the ring styles:
1. Press MENU .
2. Select
User Options
and press SND .
3. Select
Phone Ring
and Press SND .
4. Select a ring style from the menu and press SND. The phone rings once using the selected tone.
Press END to cancel.
Controlling LCD Contrast
You can configure the NetVision Data Phone display contrast levels for readibility in different
environments.
1. Press MENU .
2. Select
User Options
and press SND .
3. Select
Contrast
and press SND .
4. Select the contrast level and press SND. Press END to cancel.
Key Locking
This feature allows you to lock the keypad to prevent accidental Data Phone operation and unnecessary
battery power consumption. Any incoming call automatically unlocks the keypad.
1. Press MENU .
2. Select User Options and press SND .
3. Select Keypad Lock and press SND .
4. Select Enable or Disabled and press SND . Press END to cancel.
To unlock the keypad before initiating a call or other phone function, press and hold SND until the phone
status changes to Idle .
Data Phone Ring Volume
This feature allows you to adjust the ring volume for incoming calls.
1. Press MENU .
2. Select User Options and press SND .
3. Select Ring Volume and press SND .
4. Set the ring volume level and press SND . Press END to cancel.
Adding Vibration to Ring Style
1. Press MENU .
2. Select
User Options
. Press SND .
3. Select Ring Vibrate and press SND .
4. Select Enable or Disabled and press SND to set. Press END to cancel.