background image

Regulatory Compliance

To comply with U.S. and international regulatory requirements, the following information has been included. The document applies to the
complete line of Symbol products. Some of the labels shown, and statements applicable to other devices might not apply to all products.

Radio Frequency Interference Requirements

This device has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the Federal
Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor-
rect the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements - Canada

This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations.

CE Marking & European Union Compliance

Products intended for sale within the European Union are marked with the CEMark which indicates compliance to
applicable Directives and European Normes (EN), as follows. Amendments to these Directives or ENs are included:
Normes (EN), as follows.

Applicable Directives:

Electromagnetic Compatibility Directive 89/336/EEC
Low Voltage Directive 73/23/EEC
Applicable Standards:
EN 55 022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
EN 50 082-1 - Electromagnetic Compatibility - Generic Immunity Standard, Part 1: Residential, commercial, Light Industry
IEC 801.2 - Electromagnetic Compatibility for Industrial Process Measurement and Control Equipment Part 2: Electrostatic Discharge
Requirements
IEC 801.3 - Electromagnetic Compatibility for Industrial Process Measurement and Control Equipment Part 3: Radiated Electromagnetic
Field Requirements
IEC 801.4 - Electromagnetic Compatibility for Industrial Process Measurement and Control Equipment Part 4: Electrical Fast Transients
Requirements
EN 60 950 + Amd 1 + Amd 2 - Safety of Information Technology Equipment Including Electrical Business Equipment
EN 60 825-1 (EN 60 825) - Safety of Devices Containing Lasers 

RF Devices

Symbol RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be
labeled as required. The majority of Symbol RF devices are type approved and do not require the user to obtain license or authorization
before using the equipment. Any changes or modifications to Symbol Technologies equipment not expressly approved by Symbol
Technologies could void user authority to operate the equipment.

Laser Devices

Symbol products using lasers comply with US 21CFR1040.10, Subchapter J and IEC825/EN 60 825 (or IEC825-1/EN 60
825-1, depending on the date of manufacture). The laser classification is marked one of the labels on the product.
C

Clla

assss  1

1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is

required to comply with US and international regulations:

Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous visible or invisible
laser light exposure.
C

Clla

assss  2

2 Laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid

staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to 

be harmful

.

Patents

This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No.
4,360,798;  4,369,361;  4,387,297;  4,460,120;  4,496,831;  4,593,186;  4,603,262;  4,607,156;  4,652,750;  4,673,805;
4,736,095;  4,758,717;  4,816,660;  4,845,350;  4,896,026;  4,897,532;  4,923,281;  4,933,538;  4,992,717;  5,015,833;
5,017,765;  5,021,641;  5,029,183;  5,047,617;  5,103,461;  5,113,445;  5,130,520;  5,140,144;  5,142,550;  5,149,950;
5,157,687;  5,168,148;  5,168,149;  5,180,904;  5,229,591;  5,230,088;  5,235,167;  5,243,655;  5,247,162;  5,250,791;
5,250,792;  5,262,627;  5,262,628;  5,266,787;  5,278,398;  5,280,162;  5,280,163;  5,280,164;  5,280,498;  5,304,786;
5,304,788;  5,306,900;  5,321,246;  5,324,924;  5,337,361;  5,367,151;  5,373,148;  5,378,882;  5,396,053;  5,396,055;
5,399,846;  5,408,081;  5,410,139;  5,410,140;  5,412,198;  5,418,812;  5,420,411;  5,436,440;  5,444,231;  5,449,891;
5,449,893;  5,468,949;  5,471,042;  5,478,998;  5,479,000;  5,479,002;  5,479,441;  5,504,322;  5,519,577;  5,528,621;
5,532,469;  5,543,610;  5,545,889;  5,552,592;  5,578,810;  5,581,070;  5,589,679;  5,589,680;  5,608,202;  5,612,531;
5,619,028;  5,664,229;  5,668,803;  5,675,139;  5,693,929;  5,698,835;  5,705,800;  5,714,746;  5,723,851;  5,734,152;
5,734,153;  5,745,794; 5,754,587;  5,762,516;  5,763,863;  5,767,500;  5,789,728;  5,808,287;  5,811,785;  5,811,787;
5,815,811;  5,821,519;  5,821,520;  5,823,812;  5,828,050;  5,850,078; 5,861,615;  5,874,720;  5,875,415;  D305,885;
D341,584;  D344,501;  D359,483;  D362,453;  D363,700;  D363,918;  D370,478;  D383,124;  D391,250;  D405,077;
D406,581
Invention No.  55,358;  62,539;  69,060;  69,187 (Taiwan);  No. 1,601,796;  1,907,875;  1,955,269 (Japan);  European Patent
367,299;  414,281;  367,300;  367,298;  UK  2,072,832;  France 81/03938;  Italy 1,138,713

Summary of Contents for NetVision NP-3010













Reviews: