manualshive.com logo in svg

Symbol LS 6800, User Manual

Share
Download
Symbol LS 6800 User Manual Download Page 243

Glossary-9

Glossary

Symbol Length 

Length of symbol measured from the beginning of the quiet zone (margin) 
adjacent to the start  character to the end of the quiet  zone (margin) adjacent 
to a stop character.   

Symbology 

The structural rules and conventions for representing data within a particular 
bar code type (e.g. UPC/EAN, Code 39).

Symmetric Bar 
Width Growth 

Uniform growth of bars evenly distributed.

Tolerance 

Allowable Deviation From The Nominal Bar Or Space Width.

Two-dimensional 
Symbology 

Designed for high information density and higher encoding capability than 
one-dimensional bar codes, a symbology which encodes data in both the 
horizontal (X-dimension) and vertical dimensions, usually in a “stacked” or 
multi-row arrangement.

Upc 

Universal Product Code.  A relatively complex numeric symbology.  Each 
character consists of two bars and two spaces, each of which can be any of 
four widths.  The standard symbology for retail food packages in the United 
States. 

Visible Laser 
Diode (Vld) 

A solid state device which produces visible laser light.  Laser light emitted 
from the diode has a wavelength of 670 to 680 nanometers.

Void 

Absence of ink within printed bars.

X-dimension 

Width of the narrowest  element (bar of space)  in a bar code symbol.

Y-dimension 

Element height, as applied to a two-dimensional symbology, which must 
equal or exceed a required minimum.

Zero-suppressed 
Code 

A version of UPC/EAN which reduces the number of characters in the code.  
The resulting code combines the manufacturer's code and the product's code 
of Version A in a retail application. 

Summary of Contents for LS 6800


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands