Sym Quad Lander 300, Service Manual

Page: 212 / 244

16. REAR BRAKE & REAR WHEEL & REAR CUSHION
16-10
Remove rear swing arm bolt, and then remove
re Special tool:
Tool number
：
SYM-5220300-RFA
Tool name
：
swing arm air socket.
Disk Brake System Inspection
Inspection
By visual examination whether divulges or the
damage, with spanner inspection brake tube seam
whether becomes less crowded, and the
inspection handle bar turn right or turn left, or
pressure the cushion, whether besides the
pipeline protection department, whether there is
interferes, contacts other parts of.
Check the brake from behind the brake caliper.
The brake pad must be replaced with new lining
when the brake pad wear limit reaches the brake
disk.
Caution
y
Check the rear brake lining must be removed
rear wheel first.
Park the ATV on a level ground, and check if fluid
level is under the “LOWER” mark.
Recommended Brake Fluid: WELL RUN BRAKE
OIL (DOT 3).
Caution
y
The vehicles inclined or just stop, the survey oil
level could not be accurate, had to settle the
3~5 minute.
y
In order to prevent has the chemical change,
please do not use counterfeiting or other
unclear trade marks brake fluid.
y
Uses by all means must with the trade mark
brake fluid, guarantees the ghost vehicle
efficiency.
Brake lining wears
limit grooves
Brake disk