8
§
USE OF BUTTONS
§
Electrical starter button
This is a starting motor button(switch) for engine starting.
With the main switch
“
on
”
, press this button while holding the front or rear brake lever will start
the engine.
High/low beam switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and beams.
This is for high beam.
This is for low beam.(please turn to low beam riding in city.)
Seat open switch
Turn ignition switch to the
“
ON
”
position and press this button down. Then, the seat will be
open.
This button will return to original position after
releasing.
Press the seat down and it will be locked
automatically.
After the seat catch has been locked , check to
make sure it has locked properly by lightly lifting
the seat.
CAUTION:
Release this button immediately after engine has been starter, and never press the button again to
avoid damaging the engine.
This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
Do not use light system. Turn headlight and turn signal light to the
“off” position when the engine
is being started.
Seat open
switch
CAUTION:
Be sure to remove the key after the seat has
been locked.
Do not put the key inside the storage box
after unlocking to avoid the key being locked
inside the storage box when the seat is
pressed down automatically.
Turn Signal
Switch
Horn Switch
High/low
beam switch
Seat open
switch
Electrical starter
button
