19
EN
1A23
Other Connections
4 Other
Connections
There are various ways of connecting the STB to an audio device or video device. Connect according to your
equipment. The following pages show some sample connections.
•
Choose one type of audio connection (unless you also want to connect a recording device).
•
When changing connections, turn all devices off.
•
Refer to each owner’s manual for further information on other devices.
1
Refer to "Antenna Connections" to connect the STB to the Smart Antenna (or a different one if you wish).
2
Refer to “TV/Monitor Connections” to connect STB and the TV with a video cable.
3
Connect an Optical or Coaxial digital audio cable from the DIGITAL AUDIO OUT (OPT. or COAX.) jack
on STB to an Optical or Coaxial digital audio input jack on the digital decoder.
4
Plug the AC power cord of the decoder into an AC outlet, then turn the decoder on.
5
Set the decoder to the input mode.
Refer to your decoder’s manual for details.
6
Plug the AC power cord of STB into an AC outlet and turn it on.
Dolby information:
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
of Dolby Laboratories.
D. AU D I O O U T
C O A X .
L
P b
P r
L
R
1
2
Y
C V B S
O U T
C O M P.
O U T
A N T.
C T L
D. AU D I O
O U T
DV I COMP.
DV I - D H D C P O U T
OPT
S - V I D E O
O U T
RESOLUTION
SELECT
1 0 8 0 i / 7 2 0 p / 4 8 0 p
A N T. I N
AU D I O O U T
Digital Decoder
Coaxial digital
audio cable
Optical digital
audio cable
To Coaxial digital
audio input jack
To Optical digital
audio input jack
Rear panel of STB
NOTE:
Optical and Coaxial digital audio cables are not included.
Or
e.g.: Connection to Digital Decoder
STB connection to a decoder with Dolby Digital
ST300UA.qxd 04.8.3 1:12 PM Page 19
