Sylvania 6842PE M, Service Manual, Page: 68 / 82

2-1-2 L0604DCP
2. Signal Connectors of Boards
No. Name of Cable Connection Disconnecting Note Connecting Note
F1 FPC (Flexible Printed Circuit) Panel -YBU, L 1 2
F2 Flat Cable Panel - XM 3 4
F3 FFC (Flexible Flat Cable) LM-YM - -
F4 FFC (Flexible Flat Cable) LM-XM - -
F5 FFC (Flexible Flat Cable) LM-LBE - -
F6 FFC (Flexible Flat Cable) LM-LBF - -
F7 FFC (Flexible Flat Cable) LM-LBG - -
F1
F3 F5 F6 F7 F4
F2
NOTES:
1. Pull out with two hands from both sides of plastic plate.
2. Push with same pressure at both sides until completely inserted.
Caution: Please be cautious that the pins of connector of FPC do not bend by miss-aligning of male
and female connectors.
3. Perform the following procedures for disconnection.
a) Pull out the locker of connector as shown right.
b) Push down the Flat Cable slightly and take back the Flat Cable (F2).
4. Perform the following procedures for connection.
a) Push down the Flat Cable slightly and insert to the slot of connector.
b) Lock the locker until a “tick” sounds.
Locker
Locker
Flat Cable (F2)
Connector of
Flat Cable (F2)